HydroActive Submersible Dirty Water Pump - 1100W
Donec hendrerit magna a consectetur ullamcorper. Donec est orci, condimentum et eleifend scelerisque, ultrices eget nunc. Quisque varius egestas convallis.
Ideal for draining pools, large ponds, stormwater ,sumps etc.
Fitted with a flotation switch it will automatically cut in at around 50cm depth and cut off at around 10-15cm.
The outlet is a standard 40mm thread (1.5 in). (This standard is the inside diameter of the pipe, the threads are actually around 46mm). The supplied outlet connector can be cut to suit different connection requirements or removed altogether to accommodate your own fitting.
Water can be clean or contaminated, passing up to 3.5mm particles. This unit will pump soapy water and water up to 35 degrees Celsius.
- POWER: 1100 watts
- Pump Rate: 15,000 L/Hr
- Voltage/Frequency: 240V / 50Hz
- Suitable for pumping clean/dirty water
- Max Grain Size: 3.5mm
- Max pump height : 9 meters
- Max Suction depth: 8m
- Outlet: 1.5in
- Power Cable Length: 10 m
- Max. Operating Temperature: 35d
- C-tick approval
- Australian Warranty: 6 Months
- 1 x 1100W Submersible Pump
- Carton Dimensions:
- 22 x 18 x 37cm - 5.7kg
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks.
Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.