Automatic Water Pump Pressure Switch Controller - Blue
Donec hendrerit magna a consectetur ullamcorper. Donec est orci, condimentum et eleifend scelerisque, ultrices eget nunc. Quisque varius egestas convallis.
The controller will stop the pump from running when there is a loss of water supply which prevents the pump from running dry and causing damage.
- Adjustable pressure controller
- Voltage: 220/240V, 50/60Hz
- Max Current: 10A
- Frequency: 50/60Hz
- Protection grade: IP65
- Max. water temperature: 60 degrees
- Starting pressure: 1.5-3 bar
- Max working pressure: 10 bar
- Connection: 1inch male
- Max. Power: 1.1kW
- C.E certified
- 1 x Water Pump Controller
- 1 x User Manual
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks.
Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.