The motor housing is enamel coated corrosion resistant marine grade cast iron, the main pump and tank body are highly chemical-resistant.
The powerful motor is forced-air cooled to prolong the life of this unit and ensure it will live up to the long duty cycles required for large capacity pools.
This pump is designed to cycle pools and spas up to 150,000 liters in 6 hours or less.
This pump is fitted with a standard Australian 3-pin plug so no electrical installation is necessary. (Please check your current pipe sizes as adapters may be required for the plumbing fittings.)
We have been impressed with this professional range of pumps which have proven to be very reliable - you simply would not find a better pump anywhere near this price.
- POWER: 1200 watts
- Pump Rate: 27,000 L/Hr
- Voltage/Frequency: 240V / 50Hz
- Max pump height : 17 meters
- Inlet: 48mm Internal / 55mm External
- Outlet: 48mm Internal / 55mm External
- Suction Depth: 4m
- Max grain size: 2.5mm
- Marine Grade Cast iron housing
- Chemical Resistant
- Corrosion Protection
- Forced air cooling motor
- Built-In Thermal Protection cut-off
- Weight: 12kg
- Power Cable Length: 1.2m
- 12 months Australian Warranty
- 1 x 1200W Pool Pump
- 1 x Instructions Manual
- Carton Dimensions:
- 60 x 35 x 20cm - 13.5kg
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks.
Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.