

Aquabuddy 10m Swimming Pool Hose Cleaner
Just connect the 10m hose to your existing filtration system (any pump of 0.5 to 2hp is fine) and let the Cleaner does its magic as it whirls, scrubs and sucks up all the dirt, algae, debris, leaves and bugs lining your pool floor and walls with wide abandon. The finned disc ensures no pool finish, such as concrete, plaster, aggregates, tile or fibreglass, is too hard for it to adhere to. Plus, its anti-stick design and unique rotation foot means every random corner and surface of your pool is cleaned without missing any spot.
Simply adjust the speed regulator to increase its suction as it sweeps clean both above ground and in-ground pools with total ease. Not least, the Pool Cleaner requires little maintenance and works in virtually silent mode.
Features
* Automatic pool cleaning system
* Suitable for above ground and in-ground pools (but not with splash pools)
* Powered by your existing filtration system - a pump of minimum 0.5-2hp (or with a minimum flow of 1000ga/h)
* Automatic regulator valve sets the ideal suction for peak performance
* Speed regulator to adjust suction power
* Anti-stick design
* Unique rotation foot
* Suitable for 0.8-3m deep pool
* Bonus quick-wear replacement Barracuda diaphragm
Specifications
* Hose length: 10m
* Assembly time: Approx. 15mins
* May not be suitable for some pebble pools
Package Content
1x Pool Cleaner
1x 10m Hose
1x User Manual
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks.
Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.